London Power ad

[-]
Search the Forum








(Advanced Search)

Power Output Measurement with a generator but no scope
#1
Hi Guys

As you acquire test equipment, you might buy things in the order you can afford them and so might have a sine wave generator before you have an oscilloscope. this would be an odd order for most people intent on having a well-equipped bench. Or maybe your scope has died and you still have to do some testing?

To test output power of an amp with a generator but no scope requires at least an AC voltmeter and a bench load. The procedure is the same as for no-scope and no-generator EXCEPT you have the generator - hehe.

Connect the generator to the amp input. Connect the bench load to the amp output. Connect the AC voltmeter across the load. Set gain or volume to zero.

Turn on the generator and the amp.

Dial volume up until the meter gives a steady reading. Note the value and dial volume back to zero.

The voltages for clipped power, so we can calculate power then divide by two for sine wave power.
Reply


Messages In This Thread
Power Output Measurement with a generator but no scope - by K O'Connor - 09-19-2018, 01:32 PM

Forum Jump:

[-]
Come in where it's warm!
A warm welcome to tube amp modding fans and those interested in hi-fi audio! Readers of Kevin O'Connor's The Ultimate Tone (TUT) book series form a part of our population. Kevin O'Connor is the creator of the popular Power Scaling methodology for amplifiers.
Please remember these three principles: respect, sharing, community.
Not familiar with The Ultimate Tone book series? See discussion topics, or click here to visit London Power/Power Press Publishing.

[-]
Tube Amp Forum Hosted by London Power
London Power logo