+- Tube Amp Forum: The Ultimate Tone (https://theultimatetone.com)
+-- Forum: Tube Amp Community (Hi-fi too!) (https://theultimatetone.com/Forum-Tube-Amp-Community-Hi-fi-too)
+--- Forum: TUT Q&A (https://theultimatetone.com/Forum-TUT-Q-A)
+--- Thread: TUT5 Standard Reverb (/Thread-TUT5-Standard-Reverb)
TUT5 Standard Reverb - sinusoids - 06-04-2023
What are the reverb tank specs for the Standard amp? What transformer is used? Fig 9.3 references a 316 driver transformer.
RE: TUT5 Standard Reverb - K O'Connor - 06-04-2023
Hi Guys
The TX316 Reverb Driver Transformer is a custom London Power part we had made by Hammond. It is only available through London Power.
The reverb tank is also custom from Accutronics, but you can substitute a standard low-z-input Fender-style tank.
RE: TUT5 Standard Reverb - sinusoids - 06-05-2023
Thank you. I ordered one
RE: TUT5 Standard Reverb - sinusoids - 06-06-2023
Input and output floating or grounded options are available. What do you recommend for the Standard circuit?
RE: TUT5 Standard Reverb - K O'Connor - 06-06-2023
Hi Guys
Both ends of the tank should have a ground reference, which they do in the TUT5 The Standard project.
RE: TUT5 Standard Reverb - sinusoids - 06-08-2023
Can I buy just your tank?
RE: TUT5 Standard Reverb - K O'Connor - 06-08-2023
Hi sinusoids
Antique Electronic Supply has the Fender tank for $25us. It is the industry standard for mechanical reverb tone.
My tank is just the internal portion for mounting inside a chassis and what I have in stock is accounted for already. Although our REV Reverb Kit and The Standard project in TUT5 use a fairly standard recovery circuit, our amps use something different, and you already know we use a different driver circuit.
Have fun.