+- Tube Amp Forum: The Ultimate Tone (https://theultimatetone.com)
+-- Forum: Marketplace & Products (https://theultimatetone.com/forum-3.html)
+--- Forum: London Power Kits & Mods (https://theultimatetone.com/forum-16.html)
+--- Thread: New PSU kits +/-12V (/thread-92.html)
New PSU kits +/-12V - K O'Connor - 03-15-2019
Hi Guys
We have two new power supply kits to support low-voltage circuitry, such as for switching and opamps. The kits provide symmetric voltage outputs aka "split rails" of +/-12Vdc at two different power levels.
PM12-6 provides +/-12V at 175mA
PM12-12 provides +/-12V at 350mA.
PM12 has universal mains fusing, and uses Hammond semi-toroidal PTs, metal-film resistrs, and 10,000-hour caps.
RE: New PSU kits +/-12V - AlliPlatt - 04-20-2020
Hi... If any of your rails fall outside of +/- 5%, it needs replacing, but that low would likely cause obvious issues.
What is your PSU make and model?
medical pcb
RE: New PSU kits +/-12V - K O'Connor - 04-20-2020
Hi AlliPlatt
Your assertion regarding regulation is unfounded since you do not provide a context. Besides which, the regulation of the PM12s is far better than 5%.
The "make" is London Power and the models of PSU are listed as links above. Go look at the product pages.
Have fun