![[-]](https://theultimatetone.com/images/collapse.png "[-]")
10-04-2020, 10:31 PM
Hi all,
Looking for advice from anyone who has used a Hammond perforated chassis cover and installed carry handles on it.
Having never used one of the perforated covers before, i'm not sure how much strength there is, or how much flex (if any) to expect.
The attached image shows my intent. I'm thinking 1mm thick plates sandwiching the cover to spread the load.
The chassis is 16" x 8". Matching cover is 20ga (0.91mm) thick. Amp is 5W single ended, so not a lot of weight in the transformers.
Cheers
Looking for advice from anyone who has used a Hammond perforated chassis cover and installed carry handles on it.
Having never used one of the perforated covers before, i'm not sure how much strength there is, or how much flex (if any) to expect.
The attached image shows my intent. I'm thinking 1mm thick plates sandwiching the cover to spread the load.
The chassis is 16" x 8". Matching cover is 20ga (0.91mm) thick. Amp is 5W single ended, so not a lot of weight in the transformers.
Cheers
