![[-]](https://theultimatetone.com/images/collapse.png "[-]")
09-13-2018, 02:30 AM
Hi Kevin,
The largest size I could make was 100mm x 150mm. The version I purchased of Eagle Cad was one step up from the demo I think. It allowed me to make my senior project which was a pro-quality microphone preamp, but the tube amp boards are usually long and skinny and I could only use a modular approach as you mentioned. I've considered it but it would be nicer to have a full size board capability if possible.
My preamp project worked but I made a couple mistakes and Rev 2 of the board will need a couple layout changes and I have to make a Molex connector, which I was having trouble figuring out at the time. That was 2015 and I haven't had the time to get back to it yet!
Greg
The largest size I could make was 100mm x 150mm. The version I purchased of Eagle Cad was one step up from the demo I think. It allowed me to make my senior project which was a pro-quality microphone preamp, but the tube amp boards are usually long and skinny and I could only use a modular approach as you mentioned. I've considered it but it would be nicer to have a full size board capability if possible.
My preamp project worked but I made a couple mistakes and Rev 2 of the board will need a couple layout changes and I have to make a Molex connector, which I was having trouble figuring out at the time. That was 2015 and I haven't had the time to get back to it yet!
Greg
