![[-]](https://theultimatetone.com/images/collapse.png "[-]")
I must have filtered the results wrong in digkey. I see the smaller ones now. I measured the current going through the 47uf caps I had on hand to test it. There was about 8 volts. I'll get some 16V o 25V 470uf caps.
For the 220k resistors that ties to the wiper and pot "o" and the 6.81k range resistor would you reccomend larger wattage for those? Are they there as fusible or should they be more robust. I'm assuming the 220k is there to be robust in case the pots fail and those resistors are on place for protection to the rest of the circuit.
For the 220k resistors that ties to the wiper and pot "o" and the 6.81k range resistor would you reccomend larger wattage for those? Are they there as fusible or should they be more robust. I'm assuming the 220k is there to be robust in case the pots fail and those resistors are on place for protection to the rest of the circuit.
