![[-]](https://theultimatetone.com/images/collapse.png "[-]")
I'm quite fond of this stuff
Aircraft Spruce is the supplier
https://www.aircraftspruce.com/catalog/e...ldwire.php (usa)
https://www.aircraftspruce.ca/catalog/el...ldwire.php (canada)
It works wonderfully for input signals and long runs under boards to control pots.
Tinned inner and shield. Tefzel sheath and mill spec for aircraft instrumentation and signals. It is Very thin. The 20ga shielded, is slightly thinner than regular non shielded PVC jacket 600v 18ga stranded I have. Unlike most chunky coax I've seen.
Also they have wonderful 18ga, 20ga and 22ga non shielded wire in many colours. All 600v. Reasonably priced and shipping wasn't terribly expensive for the amounts I've ordered.
Cheaper than the Ebay guy that sells 10ft chunks too!
I've never needed special types of wire strippers but I've got a nice set that has many gauge options as well as an old fashioned style that you can manually adjust to any size. Although I don't normally use that pair.
Aircraft Spruce is the supplier
https://www.aircraftspruce.com/catalog/e...ldwire.php (usa)
https://www.aircraftspruce.ca/catalog/el...ldwire.php (canada)
It works wonderfully for input signals and long runs under boards to control pots.
Tinned inner and shield. Tefzel sheath and mill spec for aircraft instrumentation and signals. It is Very thin. The 20ga shielded, is slightly thinner than regular non shielded PVC jacket 600v 18ga stranded I have. Unlike most chunky coax I've seen.
Also they have wonderful 18ga, 20ga and 22ga non shielded wire in many colours. All 600v. Reasonably priced and shipping wasn't terribly expensive for the amounts I've ordered.
Cheaper than the Ebay guy that sells 10ft chunks too!
I've never needed special types of wire strippers but I've got a nice set that has many gauge options as well as an old fashioned style that you can manually adjust to any size. Although I don't normally use that pair.
