![[-]](https://theultimatetone.com/images/collapse.png "[-]")
Hi victor86hm
It's just the 50W MV amp.
Since the power scaling works so awesome and the TUT3 wiring stuff made the amp so quiet, I got the bias mod kit for 2 tubes. All the projects in the book have a bias pot pot for each tube. The 800 project is kevin's version of my 50W amp but it uses 4 power tubes even though the amp is only 50W. That confused me at first - but like I'm easily confused
Kevin's 800 uses the extra tubes for tone - he calls it "100W of tone but only 50W" and the really cool thing is you can use any tubes in it or even mix tubes
Even though I read that part of the book a lot of times I had to call the master and he made it really clear for me. I bought the BMK2 and installed it and tested without tubes again - how many times did KOC tell me that! - and then tried my original tubes first. Holyw cow -it's so easy to bis a tube. Then i changed one tube like Kevin suggested and had a 6L6 working with a EL34 and it sounded much cooler !!! Then I changed the 34 to another 6L6 and it had this smooth Fender vibe but the marshall distortion from the preamp. kevin said I could use 6V6 in this amp, so I got some of those - just some cheap ones since I still had a doubt from what evryone else says on the net - and fired it up and it worked great.
The 6V6s in my Marshall sound really great. I tried pulling one 6V6 nd stuck a el34 back in and that combo sounded really really good
How is it other techs don't know this stuff? My buddies can't believe how good my amp sounds now and then I show them the tubes in the back and they freak. They tell me the tubes will blow up and its dangerous and all the kind of stuff I saw on the web before I tried this. Then I show them the book and say "this is the real sh#t man, this is like the truth no body wants you to know" I don't know anything but I got this really cool amp now that i was able to make sound good by myself all thanks to KOC
It's just the 50W MV amp.
Since the power scaling works so awesome and the TUT3 wiring stuff made the amp so quiet, I got the bias mod kit for 2 tubes. All the projects in the book have a bias pot pot for each tube. The 800 project is kevin's version of my 50W amp but it uses 4 power tubes even though the amp is only 50W. That confused me at first - but like I'm easily confused
Kevin's 800 uses the extra tubes for tone - he calls it "100W of tone but only 50W" and the really cool thing is you can use any tubes in it or even mix tubes
Even though I read that part of the book a lot of times I had to call the master and he made it really clear for me. I bought the BMK2 and installed it and tested without tubes again - how many times did KOC tell me that! - and then tried my original tubes first. Holyw cow -it's so easy to bis a tube. Then i changed one tube like Kevin suggested and had a 6L6 working with a EL34 and it sounded much cooler !!! Then I changed the 34 to another 6L6 and it had this smooth Fender vibe but the marshall distortion from the preamp. kevin said I could use 6V6 in this amp, so I got some of those - just some cheap ones since I still had a doubt from what evryone else says on the net - and fired it up and it worked great.
The 6V6s in my Marshall sound really great. I tried pulling one 6V6 nd stuck a el34 back in and that combo sounded really really good
How is it other techs don't know this stuff? My buddies can't believe how good my amp sounds now and then I show them the tubes in the back and they freak. They tell me the tubes will blow up and its dangerous and all the kind of stuff I saw on the web before I tried this. Then I show them the book and say "this is the real sh#t man, this is like the truth no body wants you to know" I don't know anything but I got this really cool amp now that i was able to make sound good by myself all thanks to KOC
