![[-]](https://theultimatetone.com/images/collapse.png "[-]")
12-10-2020, 03:13 PM
Hi Guys
Paper bobbins and plastic bobbins are both magnetically transparent, so there is zero technical reason for one to "sound" better than the other. The technique of using paper bobbins is also referred to as "stick winding". A wooden form is used to wrap the paper and then wind the wire, then the whole assembly is slid off the wooden stick.
Proponents of paper bobbins are clinging to traditional methods because those are the methods used to make output transformers in iconic vintage equipment. In general, the "renovationist" end of the MI community does not understand why a given iconic amp sounds the way it does, and they are hesitant to change anything or substitute components with different construction or different materials. I'm going to be blunt and say this view is mired in ignorance - simple lack of knowledge.
Paper preference is then purely aesthetic.
Plastic bobbins are preferred by safety agencies and can make manufacturing easier. Paper must be oil-impregnated and most oils are organic and eventually lose the properties that let them do what they should do for the paper, that is, the paper can dry out over time. paper capacitors are the worst example of such an application and the cap becomes inductive. One saving grace in the transformer application is that the transformer is likely to be vacuum varnished, where varnish is forced into every crevass within the assembly and this greatly extends the life of the paper bobbin.
Plastic is shaped by injection-molding and is inert for life, retaining its electrical insulation properties for life. The transformer can be vacuum varnished or not , although it is usually a good idea. The bobbin also provides a convenient platform to attach solder lugs or pins to for external electrical connections, whether these attachments are externally accessible or wire leads are attached by the manufacturer.
Bobbin material choice should not be something one needs to consider for transformer selection, except for two points: A nontoroidal power transformer should definitely have a plastic bobbin for safety reasons; a nontoroidal audio transformer may be priced higher than it should be if it has a paper bobbin, as many of the promoters of such construction are ethically challenged.
Paper bobbins and plastic bobbins are both magnetically transparent, so there is zero technical reason for one to "sound" better than the other. The technique of using paper bobbins is also referred to as "stick winding". A wooden form is used to wrap the paper and then wind the wire, then the whole assembly is slid off the wooden stick.
Proponents of paper bobbins are clinging to traditional methods because those are the methods used to make output transformers in iconic vintage equipment. In general, the "renovationist" end of the MI community does not understand why a given iconic amp sounds the way it does, and they are hesitant to change anything or substitute components with different construction or different materials. I'm going to be blunt and say this view is mired in ignorance - simple lack of knowledge.
Paper preference is then purely aesthetic.
Plastic bobbins are preferred by safety agencies and can make manufacturing easier. Paper must be oil-impregnated and most oils are organic and eventually lose the properties that let them do what they should do for the paper, that is, the paper can dry out over time. paper capacitors are the worst example of such an application and the cap becomes inductive. One saving grace in the transformer application is that the transformer is likely to be vacuum varnished, where varnish is forced into every crevass within the assembly and this greatly extends the life of the paper bobbin.
Plastic is shaped by injection-molding and is inert for life, retaining its electrical insulation properties for life. The transformer can be vacuum varnished or not , although it is usually a good idea. The bobbin also provides a convenient platform to attach solder lugs or pins to for external electrical connections, whether these attachments are externally accessible or wire leads are attached by the manufacturer.
Bobbin material choice should not be something one needs to consider for transformer selection, except for two points: A nontoroidal power transformer should definitely have a plastic bobbin for safety reasons; a nontoroidal audio transformer may be priced higher than it should be if it has a paper bobbin, as many of the promoters of such construction are ethically challenged.
