![[-]](https://theultimatetone.com/images/collapse.png "[-]")
04-08-2021, 10:49 AM
(This post was last modified: 04-08-2021, 10:50 AM by John Bourke.)
A few questions about the S-PRE-2 kit. Hopefully Kevin can help here.
I'm stuffing the board, and I have ended up with two capacitors that I'm not 100% on.
Markings are (as far as I can tell) 471J on the blue green one, and 0.47 J100 on the red one. The board has spots for a 470p (C7) and a 470n (C9). My assumption is that the 0.47 on the red one is 0.47 microfarads, which means 470Nanofarads, and it is C9, which leaves the blue green one for C7.
Also - I assume there's nothing keeping me from doing the tube sockets off board? Is 20AWG stranded good enough for that?
I'm stuffing the board, and I have ended up with two capacitors that I'm not 100% on.
Markings are (as far as I can tell) 471J on the blue green one, and 0.47 J100 on the red one. The board has spots for a 470p (C7) and a 470n (C9). My assumption is that the 0.47 on the red one is 0.47 microfarads, which means 470Nanofarads, and it is C9, which leaves the blue green one for C7.
Also - I assume there's nothing keeping me from doing the tube sockets off board? Is 20AWG stranded good enough for that?
