![[-]](https://theultimatetone.com/images/collapse.png "[-]")
11-02-2024, 01:25 PM
Hi Kevin, I have one of those generic made in Canada 'WidowMaker' amps. I used two 5VAC secondary filament transformers reverse back-to-back as an isolation option to make it a little bit safer to operate. Works fine, sounds as you would expect - cheap and low-fi but a useable 'raunchy' tone, easy break up with almost any volume increase.
I also wired it temporarily as a Herzog style overdrive and that worked too.
I would like to wire it to use one of the three input 1/4" phono jacks on the top panel as the TUT3 Herzog Output (the 3rd input as Output Vol) but I can't figure out how to use a new TRS jack to switch from internally wired-to-speaker to Herzog output. I do not need a bypass switch, just used by default as a combo amp and switched to a Herzog Output.
Hopefully you may have some suggestions please?
I also wired it temporarily as a Herzog style overdrive and that worked too.
I would like to wire it to use one of the three input 1/4" phono jacks on the top panel as the TUT3 Herzog Output (the 3rd input as Output Vol) but I can't figure out how to use a new TRS jack to switch from internally wired-to-speaker to Herzog output. I do not need a bypass switch, just used by default as a combo amp and switched to a Herzog Output.
Hopefully you may have some suggestions please?
